Hobart
500582
Handler 140EZ
Output30–140 A.
Duty90 A at 18.5 VDC, 30% duty cycle.
Input120-volt power. Amps input at rated output, 60 Hz, 115 V column: 20 A. A power cord with plug is included. The plug type is not named.
PlugPlug named, type not printed
10 min cycle, 120V
30% · 3.0 min on · 7.0 min off · 90 A
Duty line does not name a voltage. 90 A at 18.5 VDC, 30% duty cycle.
Does not pass 120V/15A
Does not pass 240V/50A
Sheet
Copied from the cited page. Not taken from another model or a review.
| Spec | Published value | Source, checked 2 November 2026 |
|---|---|---|
| Process | MIG and flux-cored. The included drive roll has grooves for solid wire and flux-cored wire, and the machine includes a gas solenoid and regulator. | Includes list and the opening description |
| Output amp range | 30–140 A. | Quick specs, Welding Amp Range |
| Rated duty cycle | 90 A at 18.5 VDC, 30% duty cycle. | Quick specs, Rated Output |
| Input voltage and plug | 120-volt power. Amps input at rated output, 60 Hz, 115 V column: 20 A. A power cord with plug is included. The plug type is not named. | Opening description and the specifications table |
| Wire or rod size | Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. | Includes list |
| Weight | Not published by manufacturer | The specifications table does not print a net weight, and the product-page fields read on 2 November 2026 did not include one. |
| Material thickness | Mild steel thickness range 24 ga.–3/16 in., described as a single pass, with thicker material by multiple passes and prep. | Quick specs and the opening paragraph |
Notes on the source
- The sheet says the Handler 140EZ is not recommended for use with engine-driven welders or standalone generators.
Manufacturer page · Job check · Hobart
From the table
What output does the Handler 140EZ publish?
30–140 A. Source: https://contenthub.itwwelding.com/api/public/content/hobart-welding-products/spec-sheet/PIM/7259b4-handler-140ez-299171.pdf
What duty cycle does the Handler 140EZ publish?
90 A at 18.5 VDC, 30% duty cycle. Source: https://contenthub.itwwelding.com/api/public/content/hobart-welding-products/spec-sheet/PIM/7259b4-handler-140ez-299171.pdf
What input does the Handler 140EZ publish?
120-volt power. Amps input at rated output, 60 Hz, 115 V column: 20 A. A power cord with plug is included. The plug type is not named.
Which processes does the Handler 140EZ publish?
MIG, flux-cored.