Hobart
500553
Handler 210MVP
20% · 2.0 min on · 8.0 min off · 90 A
First percent on the sheet for this voltage. 115 V: 90 A at 19 VDC, 20% duty cycle.
30% · 3.0 min on · 7.0 min off · 150 A
First percent on the sheet for this voltage. 230 V: 150 A at 23 VDC, 30% duty cycle.
Does not pass 120V/15A
Sheet
Copied from the cited page. Not taken from another model or a review.
| Spec | Published value | Source, checked 2 November 2026 |
|---|---|---|
| Process | MIG and flux-cored. Spool-gun circuitry is described for aluminum wire. A gas solenoid and regulator are included. | Includes list and the spool-gun feature |
| Output amp range | 115 V: 25–140 A. 230 V: 25–210 A. | Quick specs, Welding Amp Range |
| Rated duty cycle | 115 V: 90 A at 19 VDC, 20% duty cycle. 230 V: 150 A at 23 VDC, 30% duty cycle. | Quick specs, Rated Output |
| Input voltage and plug | 115 V or 230 V, 60 Hz. Amps input at rated output: 20 A at 115 V and 24 A at 230 V. The cord includes 5-15P (115 V, 15 A) and 6-50P (230 V, 50 A) MVP plugs. | Specifications table and the includes list |
| Wire or rod size | Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. | Includes list |
| Weight | 79 lb. (35.8 kg). | Specifications table, net weight |
| Material thickness | Mild steel thickness range 24 ga.–3/8 in., in a single pass. The sheet says thicker material is run with multiple passes and does not print that second maximum. | Quick specs and the opening paragraph |
Notes on the source
- The included 115 V plug is labeled 15 A, while input at the 90 A rating is 20 A. Both figures are printed. The job check uses the 20 A input current.
Manufacturer page · Job check · Hobart
From the table
What output does the Handler 210MVP publish?
115 V: 25–140 A. 230 V: 25–210 A. Source: https://contenthub.itwwelding.com/api/public/content/hobart-welding-products/spec-sheet/PIM/fb062c-handler-210mvp-250822.pdf
What duty cycle does the Handler 210MVP publish?
115 V: 90 A at 19 VDC, 20% duty cycle. 230 V: 150 A at 23 VDC, 30% duty cycle. Source: https://contenthub.itwwelding.com/api/public/content/hobart-welding-products/spec-sheet/PIM/fb062c-handler-210mvp-250822.pdf
What input does the Handler 210MVP publish?
115 V or 230 V, 60 Hz. Amps input at rated output: 20 A at 115 V and 24 A at 230 V. The cord includes 5-15P (115 V, 15 A) and 6-50P (230 V, 50 A) MVP plugs.
Which processes does the Handler 210MVP publish?
MIG, flux-cored.