WeldFactsSheet numbers only

Home ModelsMulti-Handler 200

Hobart · 500578

Multi-Handler 200

By · Checked · How we verify

Hobart

500578

Multi-Handler 200

OutputMIG/flux-cored: 30–200 A. DC TIG: 20–200 A. Stick: 30–200 A. The table narrows 120 V MIG to 30–120 A, 120 V TIG to 20–140 A, and 120 V stick to 30–100 A.
DutyAt 30% duty cycle: MIG 110 A at 19.5 V on 120 V and 165 A at 22.2 V on 240 V; DC TIG 105 A at 14.2 V on 120 V and 165 A at 16.6 V on 240 V; stick 90 A at 23.6 V on 120 V and 140 A at 25.6 V on 240 V.
Input120 V or 240 V, 50/60 Hz. MVP plugs: 5-15P (120 V, 15 A) and 6-50P (240 V, 50 A). Amps input at rated output, MIG: 23.0 A at 120 V and 19.0 A at 240 V. DC TIG: 16.7 A and 14.7 A. Stick: 22.0 A and 17.9 A.
Plug5-15P (120 V, 15 A), 6-50P (240 V, 50 A)
10 min cycle, 120V

30% · 3.0 min on · 7.0 min off

First percent on the sheet for this voltage. At 30% duty cycle: MIG 110 A at 19.5 V on 120 V and 165 A at 22.2 V on 240 V;

10 min cycle, 240V class

30% · 3.0 min on · 7.0 min off

First percent on the sheet for this voltage. At 30% duty cycle: MIG 110 A at 19.5 V on 120 V and 165 A at 22.2 V on 240 V;

Does not pass 120V/15A

Sheet

Copied from the cited page. Not taken from another model or a review.

SpecPublished valueSource, checked 2 November 2026
Process MIG, flux-cored, DC TIG, and stick. Quick specs and the opening paragraph
Output amp range MIG/flux-cored: 30–200 A. DC TIG: 20–200 A. Stick: 30–200 A. The table narrows 120 V MIG to 30–120 A, 120 V TIG to 20–140 A, and 120 V stick to 30–100 A. Quick specs and the specifications table
Rated duty cycle At 30% duty cycle: MIG 110 A at 19.5 V on 120 V and 165 A at 22.2 V on 240 V; DC TIG 105 A at 14.2 V on 120 V and 165 A at 16.6 V on 240 V; stick 90 A at 23.6 V on 120 V and 140 A at 25.6 V on 240 V. Specifications table, rated output at 30% duty cycle
Input voltage and plug 120 V or 240 V, 50/60 Hz. MVP plugs: 5-15P (120 V, 15 A) and 6-50P (240 V, 50 A). Amps input at rated output, MIG: 23.0 A at 120 V and 19.0 A at 240 V. DC TIG: 16.7 A and 14.7 A. Stick: 22.0 A and 17.9 A. Includes list and the specifications table
Wire or rod size Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Wire feed speed on the product page is 60–650 ipm. Includes list
Weight 38.4 lb on the product page. The spec sheet says the machine weighs under 39 pounds. Product page specifications, Net Weight
Material thickness Mild steel: MIG/flux-cored 24 ga.–3/8 in., DC TIG 22 ga.–3/16 in., stick 16 ga.–3/8 in. Quick specs, Mild Steel Thickness Range

Notes on the source

Manufacturer page · Job check · Hobart

From the table

What output does the Multi-Handler 200 publish?

MIG/flux-cored: 30–200 A. DC TIG: 20–200 A. Stick: 30–200 A. The table narrows 120 V MIG to 30–120 A, 120 V TIG to 20–140 A, and 120 V stick to 30–100 A. Source: https://contenthub.itwwelding.com/api/public/content/hobart-welding-products/spec-sheet/PIM/b8940e-multi-handler-200-287909.pdf

What duty cycle does the Multi-Handler 200 publish?

At 30% duty cycle: MIG 110 A at 19.5 V on 120 V and 165 A at 22.2 V on 240 V; DC TIG 105 A at 14.2 V on 120 V and 165 A at 16.6 V on 240 V; stick 90 A at 23.6 V on 120 V and 140 A at 25.6 V on 240 V. Source: https://contenthub.itwwelding.com/api/public/content/hobart-welding-products/spec-sheet/PIM/b8940e-multi-handler-200-287909.pdf

What input does the Multi-Handler 200 publish?

120 V or 240 V, 50/60 Hz. MVP plugs: 5-15P (120 V, 15 A) and 6-50P (240 V, 50 A). Amps input at rated output, MIG: 23.0 A at 120 V and 19.0 A at 240 V. DC TIG: 16.7 A and 14.7 A. Stick: 22.0 A and 17.9 A.

Which processes does the Multi-Handler 200 publish?

MIG, flux-cored, TIG, stick.