Miller
907757
Multimatic 220 AC/DC
60% · 6.0 min on · 4.0 min off · 105 A
First percent on the sheet for this voltage. MIG: 120 V, 105 A at 19.2 V, 60% duty cycle;
20% · 2.0 min on · 8.0 min off · 200 A
First percent on the sheet for this voltage. 240 V, 200 A at 24 V, 20% duty cycle and 170 A at 21.5 V, 40% duty cycle.
Does not pass 120V/15A
Sheet
Copied from the cited page. Not taken from another model or a review.
| Spec | Published value | Source, checked 2 November 2026 |
|---|---|---|
| Process | MIG (GMAW), flux-cored (FCAW), DC stick (SMAW), AC/DC TIG (GTAW), and pulsed TIG (GTAW-P). | Quick specs, Processes |
| Output amp range | MIG: 30–230 A. DC stick: 30–200 A. AC/DC TIG: 20–210 A. The specifications table splits those ranges by voltage: MIG 30–125 A on 120 V and 30–230 A on 240 V; stick 30–90 A on 120 V and 30–200 A on 240 V; TIG 20–140 A on 120 V and 20–210 A on 240 V. | Quick specs, Amperage Range, and the specifications table |
| Rated duty cycle | MIG: 120 V, 105 A at 19.2 V, 60% duty cycle; 240 V, 200 A at 24 V, 20% duty cycle and 170 A at 21.5 V, 40% duty cycle. Stick: 120 V, 90 A at 23.6 V, 40%; 240 V, 200 A at 28.4 V, 15%. TIG: 120 V, 130 A at 15.2 V, 40%; 240 V, 210 A at 18.4 V, 20%. | Specifications table, rated output |
| Input voltage and plug | 120/240 V, single-phase, 50/60 Hz. Amps input at rated output: MIG 23.3 A at 120 V and 27.2 A at the 200 A / 20% 240 V rating; stick 24.5 A at 120 V and 31.3 A at 240 V; TIG 24.0 A at 120 V and 22.4 A at 240 V. | Quick specs, Input Power, and the specifications table |
| Wire or rod size | Included Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Wire feed speed in the table is 60–600 ipm. | Comes complete with, and the specifications table |
| Weight | 56 lb. (25.4 kg). | Quick specs, Net Weight |
| Material thickness | Not published by manufacturer | The quick specs and the specifications table do not print a material thickness. |
Notes on the source
- The sheet describes AC balance as cleaning action. It does not name aluminum in the quick specs, so aluminum is not marked as a named metal.
Manufacturer page · Job check · Miller
From the table
What output does the Multimatic 220 AC/DC publish?
MIG: 30–230 A. DC stick: 30–200 A. AC/DC TIG: 20–210 A. The specifications table splits those ranges by voltage: MIG 30–125 A on 120 V and 30–230 A on 240 V; stick 30–90 A on 120 V and 30–200 A on 240 V; TIG 20–140 A on 120 V and 20–210 A on 240 V. Source: https://contenthub.itwwelding.com/api/public/content/miller-electric-mfg-llc/spec-sheet/PIM/abe38a-ad9-0.pdf
What duty cycle does the Multimatic 220 AC/DC publish?
MIG: 120 V, 105 A at 19.2 V, 60% duty cycle; 240 V, 200 A at 24 V, 20% duty cycle and 170 A at 21.5 V, 40% duty cycle. Stick: 120 V, 90 A at 23.6 V, 40%; 240 V, 200 A at 28.4 V, 15%. TIG: 120 V, 130 A at 15.2 V, 40%; 240 V, 210 A at 18.4 V, 20%. Source: https://contenthub.itwwelding.com/api/public/content/miller-electric-mfg-llc/spec-sheet/PIM/abe38a-ad9-0.pdf
What input does the Multimatic 220 AC/DC publish?
120/240 V, single-phase, 50/60 Hz. Amps input at rated output: MIG 23.3 A at 120 V and 27.2 A at the 200 A / 20% 240 V rating; stick 24.5 A at 120 V and 31.3 A at 240 V; TIG 24.0 A at 120 V and 22.4 A at 240 V.
Which processes does the Multimatic 220 AC/DC publish?
MIG, flux-cored, stick, TIG.