ESAB
NO SKU ON SHEET
Rebel EMP 215ic
20% · 2.0 min on · 8.0 min off · 130 A
First percent on the sheet for this voltage. MIG, 120 V, 20 A breaker: 130 A / 20.5 V at 20%.
25% · 2.5 min on · 7.5 min off · 205 A
First percent on the sheet for this voltage. MIG, 230 V: 205 A / 24.25 V at 25% and 235 A / 26 V at 15%.
Sheet
Copied from the cited page. Not taken from another model or a review.
| Spec | Published value | Source, checked 2 November 2026 |
|---|---|---|
| Process | GMAW (MIG), GTAW (TIG), and SMAW (stick). Flux-cored wire is listed in the wire-diameter table. | Manual 0463 789 001, technical data and section 5.2 |
| Output amp range | MIG setting range: 15 A / 14.75 V to 130 A / 20.5 V on 120 V, and to 235 A / 26.0 V on 230 V. TIG: 5 A to 130 A on 120 V and to 200 A on 230 V. Stick: 6 A to 130 A on 120 V and 16 A to 180 A on 230 V. | Technical data, setting range |
| Rated duty cycle | MIG, 230 V: 205 A / 24.25 V at 25% and 235 A / 26 V at 15%. MIG, 120 V, 20 A breaker: 130 A / 20.5 V at 20%. TIG, 230 V: 180 A / 17.2 V at 30%. Stick, 230 V: 180 A / 27.2 V at 25%. The table prints more duty points at 40%, 60%, and 100%. | Technical data, permissible load |
| Input voltage and plug | 120 V or 230 V, 1-phase, 50/60 Hz, ±10%. Imax MIG: 20.8 A on a 15 A breaker and 28.6 A on a 20 A breaker at 120 V; 30 A at 230 V (27.6 A at 25% duty cycle). The installation guide’s maximum recommended time-delay fuse or breaker is 30 A, and the maximum normal fuse is 50 A, for both supply voltages. Input current at maximum output in that guide is 30 A. | Technical data, primary current, and section 4.3.1 |
| Wire or rod size | Mild steel solid wire .023–.035 in. (0.6–0.9 mm). Stainless solid wire .030–.035 in. (0.8–0.9 mm). Flux-cored wire .030–.045 in. (0.8–1.1 mm). Aluminum .030–3/64 in. (0.8–1.2 mm). Spool size 4–8 in. | Technical data, wire diameter |
| Weight | 42 lb (19.1 kg). Dimensions 23 × 9 × 16 in. | Technical data, weight |
| Material thickness | Not published by manufacturer | The technical-data chapter does not print a plate thickness. |
Notes on the source
- The manual’s 120 V output table is split by a 15 A breaker and a 20 A breaker. TIG in this manual is DC.
Manufacturer page · Job check · ESAB
From the table
What output does the Rebel EMP 215ic publish?
MIG setting range: 15 A / 14.75 V to 130 A / 20.5 V on 120 V, and to 235 A / 26.0 V on 230 V. TIG: 5 A to 130 A on 120 V and to 200 A on 230 V. Stick: 6 A to 130 A on 120 V and 16 A to 180 A on 230 V. Source: https://ldgsesabwe.blob.core.windows.net/instructionmanuals/0463%20789%20001%20US.pdf
What duty cycle does the Rebel EMP 215ic publish?
MIG, 230 V: 205 A / 24.25 V at 25% and 235 A / 26 V at 15%. MIG, 120 V, 20 A breaker: 130 A / 20.5 V at 20%. TIG, 230 V: 180 A / 17.2 V at 30%. Stick, 230 V: 180 A / 27.2 V at 25%. The table prints more duty points at 40%, 60%, and 100%. Source: https://ldgsesabwe.blob.core.windows.net/instructionmanuals/0463%20789%20001%20US.pdf
What input does the Rebel EMP 215ic publish?
120 V or 230 V, 1-phase, 50/60 Hz, ±10%. Imax MIG: 20.8 A on a 15 A breaker and 28.6 A on a 20 A breaker at 120 V; 30 A at 230 V (27.6 A at 25% duty cycle). The installation guide’s maximum recommended time-delay fuse or breaker is 30 A, and the maximum normal fuse is 50 A, for both supply voltages. Input current at maximum output in that guide is 30 A.
Which processes does the Rebel EMP 215ic publish?
MIG, flux-cored, stick, TIG.